Need help?Do you have a question about the Venmar Duo 1.9 and is the answer not in the manual?
General| Heat Recovery Efficiency | 75% |
|---|---|
| Category | Ventilation |
| Supply Voltage | 120 V |
| Core Type | Polypropylene |
| Defrost Control | Automatic |
| Warranty | 5 years |
| Thermal Efficiency | 68% |
Exploded view illustrating unit components for service and identification.
Table listing replacement parts for various unit models with part numbers.
Contact information and hours for technical assistance.
Details CSA F326 and ASHRAE methods for determining ventilation requirements.
Maps and guidelines for selecting unit type based on climate zones.
Diagrams showing airflow paths during normal operation for Solo and Duo units.
Diagrams showing airflow during defrost and filtration modes.
Detailed ventilation and energy performance data for each model.
Physical dimensions and specifications of the ventilation units.
Overview of available main, optional, and link controls for the system.
Summary of model specifications including weight, power, and electrical supply.
Installation method for homes with radiant or baseboard heating.
Installation for homes with forced air heating systems.
Installation method using furnace ducts for airflow management.
Guidelines for choosing a suitable location and securely mounting the unit.
Advice on designing and planning an efficient duct system for airflow.
Method for determining appropriate duct diameters based on airflow requirements.
Procedures for installing ductwork and air registers in the home.
Instructions for connecting flexible and rigid ductwork to the unit ports.
Guidance on selecting and installing exterior intake and exhaust hoods.
Steps for connecting the drain fittings and tubing for condensate removal.
Overview and comparison of Venta, Supra, and Ultima main control units.
Details on push-button timers, wireless timers, and dehumidistats.
Explains furnace interlock, Perfect Climate Comfort Center, and memory features.
Physical dimensions and electrical specifications for main control units.
Step-by-step instructions for mounting and wiring wall control units.
Procedures for installing and programming wireless control components.
Wiring diagram for connecting optional controls to the main PC board.
Wiring instructions for furnace interlock, including cooling systems.
Wiring diagram, jumper table, and function table for Solo models.
Wiring diagram, jumper table, and function table for Duo models.
Lists required tools, materials, and preliminary stages for balancing.
Steps to prepare the unit, seal ducts, and open dampers before balancing.
Step-by-step guide to balancing airflow using a magnehelic gauge.
Procedure to verify functionality of main control modes and settings.
Procedure to verify functionality of optional remote controls and timers.
Recommended maintenance tasks and frequency for system upkeep.
Common problems and solutions for initial unit operation and setup.
Specific troubleshooting steps for the 20-minute wireless push-button timer.
Solutions for issues related to the unit's defrost cycle operation.
Lists cited industry standards, handbooks, and publications.
To Next Page