lue LED shows the Wi-Fi connection state
indicates that initiation is in
situations:
— Device is on, but the Wi-Fi si
.
— Device is in Mobile Mode but the Wi-Fi is o
Green: Connected to WAN via the bridge.
Off: Not connected to the Internet
B hard drive for Wi-Fi access
eset the device to Factory De
guration. Use a straightened paper clip or
in to activate the switch. An
or Wi-Fi access. Insert microSD card using appropriate adapter.
Use the included USB cable to connect to a computer over USB 2.0. Then you can
ess
micro USB port (8)via the supplied micro USB cable to a USB port o
a computer
or USB power supply. When your MediaShare™ Wireless is fully charged the
Green Led (1) will stop flashing
. Insert an SD card or connect a USB drive (
ash or HDD) to the USB host port
. Search for the “MediaShare™ Wireless” app from your portable devices app
store, t
evice.
4. Power on your MediaShare™ Wireless by pressing on/off button. Blue Wi-Fi led
(2) will flash until wireless broadcastin
diaShare Wireless QSG 15langs 100x140mm.indd 4 26/04/2013 14:3