Need help?Do you have a question about the Veridt 900W2037 and is the answer not in the manual?
Details wire color and connection for Standard Wiegand interface.
Details wire color and connection for Wiegand & RS-485 interfaces.
Details wire color and connection for Standard Serial RS-485 interface.
Lists current requirements for Stealth series reader part numbers.
Recommends cable types and maximum lengths based on power and gauge.
Refers to Installation Guide for Veridt EWAC communications module.
The Veridt Stealth Series Readers are a line of access control devices designed for secure identification and verification. These readers are available in several models, each offering distinct features and functionalities to suit various security requirements. The models include the Stealth Bio (PN 900W2030), Stealth Dual (PN 900W2036), Stealth Dual Lite (PN 900W2037), Stealth (PN 900W2026), and Stealth Lite (PN 900W2027).
The primary function of the Veridt Stealth Series Readers is to provide secure access control by verifying user credentials. Depending on the model, these readers can incorporate biometric authentication (fingerprint), card-based access, or a combination of both. The Stealth Bio model, for instance, features a fingerprint scanner and a keypad, allowing for multi-factor authentication. Other models, such as the Stealth Dual and Stealth Dual Lite, likely support card-based access with an integrated keypad for PIN entry. The Stealth and Stealth Lite models are typically card-only readers, offering a streamlined access solution. These readers are designed to integrate with existing access control panels and systems, providing signals for access granted, tamper detection, and communication of credential data.
All Veridt Stealth Series Readers operate at 12 VDC ± 1 V. It is crucial to maintain this voltage range, as operation above 13 VDC can damage the reader, and operation below 11 VDC can lead to intermittent or complete loss of reader operation. The power consumption varies by model:
The recommended cable type is non-plenum unshielded, unless plenum or other specific cable types are required by local specifications. The maximum cable lengths are dependent on the power requirement of the reader and the wire gauge used:
The readers support multiple wiring configurations:
Standard Wiegand:
Wiegand & RS-485:
Standard Serial RS-485:
Biometric Authentication (Stealth Bio): The Stealth Bio model (PN 900W2030) features a "PLACE FINGER" area for fingerprint scanning, enhancing security with biometric verification. It also includes a keypad for PIN entry, allowing for multi-factor authentication.
Card-Based Access: All models are designed to work with access cards. The Stealth Dual and Stealth Dual Lite models likely support different card technologies or offer enhanced features for card management. The Stealth and Stealth Lite models are primarily card readers.
Keypad Entry: Models like the Stealth Bio and Stealth Dual include a keypad (numbered 0-9 with * and # keys) for PIN entry, which can be used in conjunction with card or biometric authentication for increased security.
EWAC Operation: For readers configured with the Veridt EWAC communications module, users should refer to the Installation Guide for specific operational details.
Tamper Switch: Each Stealth series reader includes a tamper switch located on the back. This micro-switch is engaged, creating a closed circuit, when the reader is securely mounted to its bracket. If the reader is removed, the micro-switch releases, opening the circuit. This feature allows the access control panel to detect unauthorized removal or tampering with the reader. The tamper switch is Normally Open (NO) and rated at 28 VDC @ 500mA. Connecting this wire to the appropriate panel input enables the detection of open and closed circuits, providing an important security alert.
Wiring Precautions: It is critical to attach the black ground wire and red power wire to the appropriate connectors. Reversing these power wires will void the warranty, highlighting the importance of correct installation for device longevity and support.
Power Supply Recommendations: To ensure smooth operations and prevent damage, it is recommended to connect the reader directly to the primary power supply that provides power to the access control panel. This ensures adequate power delivery and avoids issues that might arise from insufficient power, especially since many access control panels or reader control units may not have sufficient power for Stealth reader devices.
The Veridt Stealth Series Readers are robust and versatile access control solutions, offering various authentication methods and essential security features like tamper detection, all while emphasizing precise power management and wiring for optimal performance and reliability.
General| Brand | Veridt |
|---|---|
| Model | 900W2037 |
| Category | Card Reader |
| Language | English |
To Next Page
