VERIDT INC · Middleton, WI 53562
4
www.veridt.com
•QUICK START GUIDE•
Verify Identify
Tamper Switch.
The Stealth series reader includes a tamper switch that is located on the back of the reader. When the reader is
secured to the mounting bracket, the micro-switch is engaged creating a closed circuit
When the reader is removed, the micro-switch releases and the circuit opens.
Connect the tamper switch wire to the appropriate panel input to detect open and closed circuits.
The tamper switch is Normally Open (NO) and rated at 28 VDC @ 500mA.
EWAC Operation
Refer to the Installation Guide for information about readers configured for Veridt EWAC communications
module
©Copyright 2022 Veridt, Inc. All rights reserved. Specifications subject to change without notice. Veridt, Stealth, and MultiMode are
trademarks of Veridt. All other brands or product names are the trademarks or registered trademarks of their respective holders.
Stealth Series Readers
To Previous Page
Loading...
