(proceeds the same for each record in the batch)
_______________________
TOTAL COUNT = 10
UNDER 21 COUNT = 2
UNDER 18 COUNT = 5
****END OF BATCH****
3. Check License Feature – If this feature is enabled and a license swipe license swipe results in an age less than thirty, The ID-
eOmni will display “CHECK LICENSE PHOTO”. This is used to help ensure that the clerk checks the license thoroughly for anyone
near the age of 21.
4.
Count Feature – Depressing the purple key below the word “COUNT” causes a display of the total number of licenses swiped since
the last batch delete. This is a method of ensuring that clerks are actually using The ID-eOmni on a regular basis.
5. Check Validation Feature - Validate the i.d. for a person writing a check. If this feature is enabled, depressing the purple key below
the word “CHECK” prior to a license swipe puts the data into a Check Batch instead of the Age Verification Batch, thereby allowing
separate batch reporting of i.d.’s scanned for check cashing . Receipt printing and display are the same as for a normal i.d. scan
operation.
PAPER SPECIFICATIONS
Paper Type: Thermal-sensitive roll paper, single ply / Width: 57mm / Length: 25 Meters or 35 Meters Diameter:
Outer: 47 mm for 25 meter length
Outer: 56 mm for 35 meter length
Inner: 12 mm
Thickness: 0.06 mm nominal
To Previous Page
Loading...
Need help?
General
