Need help?Do you have a question about the VERIGA STOP&GO CAR and is the answer not in the manual?
Instructions for laying out chains, removing tangles, and positioning hooks.
Important note about hook orientation for proper installation and to avoid tire damage.
Steps for connecting the side cable, including securing latch (C) and draping cable (D).
Instructions on using the top tensioner (E) and attaching the cable to the green connector (F).
Safety warning about keeping fingers clear of the chain and tensioner during operation.
Instructions for sliding the side cable to the back of the tire (G) and ensuring chain centering.
Instructions on using the bottom tensioner (H) and connecting to the side chain connector (I).
Safety warning about keeping fingers clear of the cable and tensioner during operation.
Instructions to tighten tensioners and initiate self-tightening of the chains.
Safety precautions for chain removal: park off-road, engine off, emergency brake set.
Steps to remove the bottom tensioner (H) and disconnect the cable from connector (I).
Safety warning about keeping fingers clear of cable and tensioner during removal.
Instructions to remove the top tensioner (E) and disconnect the cable from connector (F).
Safety warning about keeping fingers clear of cable and tensioner during removal.
Instructions to disconnect the back side cable and details on post-use maintenance: washing, inspection, storage.
Disclaimer of warranties, excluding damage from failure, misuse, abuse, or inconvenience.
Remedies limited to credit, repair, or replacement; voided by speeds over 50 km/h or improper installation.
Information on vehicle clearance, proper fit, chain inspection, speed limits, and driving precautions.
Instructions for repairing chains using supplied parts and tools, illustrated with pliers.
General| Category | Automobile Accessories |
|---|---|
| Material | Steel |
| Chain Link Size | 12 mm |
| Tensioning System | Manual |
| Function | Anti-skid |
To Next Page