990-03558-00 Rev B
DCO-00245
5. To set the time:
a. Scroll to Set time, and press the Select button ✓.
b. Adjust the hour with the Up button ↑ and Down button ↓. Press the Select button ✓.
c. Adjust the minute with the Up button ↑ and Down button ↓. Press the Select button ✓.
d. Choose AM or PM with the Up button ↑ and Down button ↓. Press the Select button ✓.
6. To set the date:
a. Scroll to Set date, and press the Select button ✓.
b. Adjust the month with the Up button ↑ and Down button ↓. Press the Select button ✓.
c. Adjust the day with the Up button ↑ and Down button ↓. Press the Select button ✓.
d. To confirm, press the Select button ✓.
7. To change the display between a 12-hour to 24-hour clock: scroll to 12/24 hr, and press the Select button ✓. Use the
buttons to adjust the format of the display time
8. When done, press the Select button ✓.
Note: If you manually changed the time on your Study Watch, syncing your watch with the Study Hub will revert the date and time
back to that of the Study Hub.
Add and manage alarms
For devices with version 49.000 and above, you can create alarms on your Study Watch that will cause the device to vibrate and
chime when the alarm goes off:
9. Enter the menu by pressing the Select button ✓.
10. Scroll with the Down button ↓ to find Alarm, and press the Select button ✓.
11. Find Add alarm, and press the Select button ✓.
12. To set the time:
i. Adjust the hour with the Up button ↑ and Down button ↓. Press the Select button ✓.
To Next Page
Loading...