Veriton N4680GT - User Manual

Questions and Answers

B
Brett FrederickJul 28, 2025
What to do if my Veriton N4680GT says 'Keyboard Error Or No Keyboard Present'?
- K
  Kimberly CooperJul 28, 2025
  If your Veriton Desktop displays a 'Keyboard Error Or No Keyboard Present' message, it means the system cannot initialize the keyboard. Ensure the keyboard is correctly attached and that no keys are being pressed during the Power-On Self-Test (POST). If you intend to use the system without a keyboard, configure the error halt condition in Setup to 'HALT ON ALL, BUT KEYBOARD'.
J
Jasmine CookeAug 1, 2025
What to do if my Veriton Desktop displays 'HARD DISK INSTALL FAILURE'?
- P
  powellcharlotteAug 1, 2025
  If your Veriton Desktop shows 'HARD DISK INSTALL FAILURE', it indicates that the system can't find or initialize the hard drive controller or the drive itself. Ensure that the controller is correctly installed. If no hard drives are installed, verify that the Hard Drive Selection in Setup is set to NONE.
Q
qwatsonAug 6, 2025
Why does my Veriton Desktop say 'CMOS Checksum Error- defaults loaded'?
- T
  Thomas GriffinAug 6, 2025
  If your Veriton Desktop displays a 'CMOS Checksum Error- defaults loaded' message, it means the checksum of the CMOS is incorrect, and the system has loaded the default equipment configuration. This error could mean that the CMOS has become corrupt or that the battery is weak. Check the battery and replace it if needed.
Q
qperezAug 10, 2025
What to do if my Veriton N4680GT Desktop says 'Keyboard is locked out - Unlock the key'?
- C
  Courtney PerezAug 10, 2025
  If your Veriton Desktop displays the message 'Keyboard is locked out - Unlock the key', it typically means that one or more keys were pressed during the keyboard tests. Ensure that there are no objects resting on the keyboard.
J
Jeremiah HallAug 14, 2025
What to do if my Veriton Desktop displays 'BIOS ROM checksum error - System halted'?
- J
  John WhiteAug 14, 2025
  If your Veriton Desktop displays a 'BIOS ROM checksum error - System halted' message, it indicates that the checksum of the BIOS code in the BIOS chip is incorrect, suggesting the BIOS code may be corrupt. Contact your system dealer to replace the BIOS.
T
Thomas BarrAug 18, 2025
What to do if my Veriton Desktop displays 'CMOS Battery Failed'?
- A
  Adam McdonaldAug 18, 2025
  If your Veriton Desktop displays a 'CMOS Battery Failed' message, it means the CMOS battery is no longer functional. Contact your system dealer for a BIOS replacement.
M
Mrs. Courtney Velasquez MDAug 23, 2025
What to do if my Veriton N4680GT Desktop displays 'Display switch is set incorrectly'?
- P
  Paula TravisAug 23, 2025
  To resolve the 'Display switch is set incorrectly' message on your Veriton Desktop: Determine the correct setting, then either turn off the system and change the jumper, or enter Setup and change the Video selection.

Summary

Disassembly Procedures

Safety Guidelines

General safety instructions for component removal and disposal.

Pre-disassembly Instructions

Steps to take before starting any maintenance procedures.

CPU Removal

Steps to remove the Central Processing Unit.

Mainboard Removal

Steps to remove the mainboard.

Reassembly Procedures

CPU Installation

Steps to install the Central Processing Unit.

Mainboard Installation

Steps to install the mainboard.

Veriton N4680GT Specifications

General

Operating System	Windows 10 Pro
Audio	High Definition Audio
Bluetooth	Bluetooth 5.0
Network	Gigabit Ethernet
RAM	8GB DDR4
Storage	256GB SSD
Graphics	Integrated Intel UHD Graphics 630
Ports	1 x HDMI
Wireless	802.11ac
Power Supply	65W adapter

Related product manuals

Veriton S2680G

36 pages