FIREWALL
6.0f/ DMZ Host
DMZ Host allows a single device on your primary network to be
fully exposed to the internet for special purposes like internet
gaming.
Warning: Enabling DMZ Host is a security risk. When a device
on your network is a DMZ Host, it is directly exposed to the
internet and loses much of the protection of the firewall. If it is
compromised, it can also be used to attack other devices on your
primary network.
Follow these steps to designate a device on your primary network
as a DMZ Host:
1. From the Advanced Advanced menu, select Firewall Firewall and then click
DMZ HostDMZ Host.
2. Select EnableEnable for the DMZ Host.
3. Enter the IP address or select the MAC address of the
device you want to designate as the DMZ Host.
4. Click Apply ChangesApply Changes to save changes.