W59VR Ruggedized Wireless Handset for W60 - Users Guide
Network details & coverage maps at vzw.com. © 2021 Verizon. Page 10
Registering Handsets to a Base Station
You can register the handset to a base station.
Procedure
Do one of the following:
•
Press the Reg soft key on the handset to register quickly.
•
Press OK > Register Handset and then select the desired base station to complete registration of the handset.
•
Go to OK > Settings > Registration > Register Handset and then select the desired base station to complete
registration of the handset.
After registration, the handset prompts “Handset Subscribed”.
Note: The default base PIN is 0000.
Selecting a System to Connect
You can connect the handset to a desired system manually, or allow the handset to connect the registered system with the
greatest signal strength automatically.
Procedure
1.
Go to OK > Settings > Registration > Select Base.
The phone screen displays all systems that the handset is registered to and the BestBase option.
2.
Select the desired system or BestBase, and then press Select.
Call Features
You can use the phone to place and answer calls, ignore incoming calls, transfer a call to someone else, conduct a
conference call and perform other basic call features.
Placing Calls
After the handset is registered successfully, you can use your handset to place an external call.
The handset can keep 2 calls at one time at most, one (associated with the audio) active and the other one on hold.
Placing External Calls
You can place external calls on the handset.
Procedure
1.
Enter the desired number using the keypad.
2.
Press the OK key to dial out.
Placing Multiple External Calls
When you are in a call, you can hold your current call and place a new call.
Procedure
1.
Select New Call.
2.
Enter the contact number and press the OK key.
Note: You can select Options > Directory to select a contact from the directory to dial out.
Placing a Call from the Call History
You can place calls to contacts from the History list, which contains the calls that were recently placed, answered, or missed.
Procedure
1.
Press History.
To Next Page
Loading...
Need help?
General