W59VR Ruggedized Wireless Handset for W60 - Users Guide
Network details & coverage maps at vzw.com. © 2021 Verizon. Page 17
Press
or End.
If any party in the conference ends the call, the other parties remain connected.
Holding/Resuming a Conference Call
Any party in the conference call can place himself/herself on hold, but other parties can continue the conference call
normally.
About this task
Note: The conference call will only be held when all parties in the conference call place themselves on hold.
Procedure
1.
Select Options > Hold.
2.
Select Resume to resume the held conference call.
Ending a Conference Call
You can end the current conference call at any time.
Procedure
Press
or End.
If any party in the conference ends the call, the other parties remain connected.
Advanced Call Features
By using the advanced features, your handset would perform more functions that make your work more efficiently.
Call Park and Call Retrieve
You can park a call, and then retrieve the call either from your phone or another phone. After parked, the call is placed on
hold, you can continue the conversation after retrieving it.
Retrieving a Call with a Retrieve Key
You can easily use a retrieve key to retrieve a parked call quickly.
Before you begin
Check with your system administrator if the FAC or Transfer mode is set on your phone, and if the call park feature has set
for your phone.
Procedure
1. Go to OK > Settings > Shortcut.
2. Highlight the desired shortcut key and press Change.
3. Select Retrieve.
When there is a call parked on the extension or the shared parking lot, you can press the Retrieve key on the idle
screen, and the handset will dial the configured park retrieve code.
Voice Mail
Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on your IP phones. This
feature is set up on the server-side and not all servers support this feature.
To Next Page
Loading...
Need help?
General