W59VR Ruggedized Wireless Handset for W60 - Users Guide
Network details & coverage maps at vzw.com. © 2021 Verizon. Page 23
Procedure
Do one of the following:
•
Press the On-hook key. The handset screen lights up.
•
Place the handset to the charging cradle.
Turning Handset Off
The handset will be turned off automatically when the battery runs out. You can also turn the handset off manually.
Procedure
Long press the On-hook key when the handset is idle.
Changing the Wallpaper
You can change the wallpaper that is displayed on the idle screen.
Procedure
1.
Go to OK > Settings > Display > Wallpaper.
2.
Press the navigation keys to select the desired image.
3.
Confirm the action.
Setting the Screen Saver
The screen saver is designed to protect your phone screen. When the screen saver is enabled, an analog clock will be
activated and appear on the phone screen if the handset is idle for approximately 10 seconds.
Procedure
1.
Go to OK > Settings > Display > Screen Saver.
2.
Press Change to select the Screen Saver check box (the default status is checked).
Changing the Brightness
The handset backlight in charger or out of charger can be configured independently.
When in charger/out of charger is enabled, the backlight will be turned off after the handset is idle for about 30 minutes when
the handset is or is not in the charging cradle. When an incoming call arrives, a key is pressed or the handset status changes,
the backlight is automatically turned on.
Procedure
1.
Go to OK > Settings > Display > Display Backlight.
2.
Select the desired value from the Active Level field.
3.
Select the desired value from the In Charger or Out Of Charger field.
4.
Confirm the action.
Setting the Keypad Light
You can enable the keypad light to illuminate the keypad keys when any key is pressed.
Procedure
1.
Go to OK > Settings > Display > Keypad LED.
2.
Press Change to select the Keypad LED check box (the default status is checked).
Changing the Language
To Next Page
Loading...
Need help?
General