Installation
Mount Plate
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
13
Use the mount plate as a template and
mark the correct hole pattern needed.
A Direct wall/ceiling mount
B Square Junction Box (4 in [101.6mm])
C Single Gang Junction Box
D Round Junction Box (4 in [101.6mm) and
3½ in[88.9mm])
E Double Gang Junction Box
F European Junction Box
Through mounting surface or junction box Along the mounting surface
Cable Routing Options
To Next Page
Loading...