Introduction
31
LED Behavior
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Network
Solid Blue
Connected to
network.
Flashing Blue
Connecting to
network.
Flashing Blue &
Orange
Network Error.
PoE Out
Solid Blue
Data and power up to
30W.
Solid Green
Data and power up to
27W.
Magenta
Data only.
No Light
PoE Out disabled via
Command.
Blinking Amber
Data only.
Network
1 Blue, 1 Orange
Camera is connected with PoE,
but unable to connect to
the switch.
1 Blue, 2 Orange
Camera has not received an
IP address.
1 Blue, 3 Orange
Camera is unable reach the
configured Gateway.
1 Blue, 4 Orange
Camera has detected duplicate
IP addresses on the LAN.
The LED will flash in a specific
order, depending on the error
state. You will see 1 blue flash,
followed by a number of
orange flashes.
1 Blue, 5 Orange
Camera is unable to resolve
Verkada hostnames.
1 Blue, 6 Orange
Camera is unable to receive a
response from the NTP Server.
1 Blue, 7 Orange
Camera is unable to certify the
SSL connection, likely due to SSL
inspection.
1 Blue, 8 Orange
Verkada endpoints are
unreachable after bootup.
–
Status
Solid Blue
Running and healthy.
Flashing Blue
Network issue. See
Network LED for diagnosis.
Solid Orange
Booting up.
Flashing Orange
Updating firmware.
Solid Magenta
Power input is 802.3af PoE,
so some functionality
may be limited. See Install
Guide for details.
Flashing Magenta
Unknown issue. Please
contact our 24/7
Technical Support Team.
PoE Out
Solid Blue
Data and power up
to 30W
Solid Green
Data and power up
to 27W.
Magenta
Data only.
No Light
PoE Out disabled via
Command.
Blinking Amber
Data only.
Example of 1 Blue, 5 Orange
flash sequence.
To Previous Page
Loading...