Introduction
What’s in the box
What you’ll need
● A working internet connection
● A smartphone or laptop
● A #2 Phillips screwdriver or
power drill with a #2 Phillips driver bit
● 1/4 inch (6.5mm) drill bit for wall anchors
● 1/8 inch (3mm) drill bit for pilot holes
● A shielded Cat5E or better Ethernet cable with
a .2–.25 in (5-6.5mm) outside diameter
● Flathead screwdriver
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Cover
(Attached to controller)
6
Mount Plate
(Attached to controller)
#6-32 Machine Screws (4 pcs)
Length: 25.4mm Drive: #2 Phillips
M4 Wall Screws (4 pcs)
Length: 25mm Drive: #2 Phillips
Connect
For easy registration and setup, scan
the QR code on the product.
If you prefer to manually register your
product, go to verkada.com/start.
T10 Security Torx
Screwdriver
Controller
Wall Anchors (4 pcs)
Length: 25mm Drive: NO
To Next Page
Loading...