Installation
Mounting option 1: Single gang
1. Loosen the security screw until
the entire screwhead is exposed
and remove the AD33 Door
Reader from the mullion mount.
2. Route the building-side cable
through the opening in the single
gang mount. Secure the single
gang mount to the junction box
using the 2 M3 machine screws.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
6
To Next Page
Loading...