Vermona Mono lancet - User Manual

!
!
!
!
!
!
!
!
!
!
!
!
"#$%&#!'"()$!
!

Summary

General Safety and Operational Guidelines

Unpacking and Starting Up

Connecting and Powering the Mono Lancet

Connect power and audio, then start the unit. Allow warm-up time for stability.

Common Oscillator Controls

The Filter Section

CUTOFF

Defines the low-pass filter's cutoff frequency. Can be influenced by MIDI.

RESONANCE

Controls filter feedback, emphasizing cutoff frequencies or causing oscillation.

EG INT

Sets envelope generator modulation intensity for the cutoff frequency.

LFO INT

Sets LFO modulation intensity for the cutoff frequency.

TRACK

Switches filter tracking (0, 50, 100), influencing cutoff based on played note.

The Amplifier Section

MODE

Selects modulation source for VCA: EG, GATE, or always ON.

VOLUME

Sets the overall output volume of the Mono Lancet.

The LFO Section

WAVE

SPEED

The Envelope Generator

ATTACK

DECAY

SUSTAIN

RELEASE

Further Control Elements

TRIG

SEQ

OVERKILL

Connectors

The MIDI Interface of the Mono Lancet

Setting up the MIDI channel

Procedure to change the MIDI channel from default channel 1.

Reset

Resets MIDI channel and controller settings to factory defaults.

MIDI Control Change Messages

Pitch Bender on;off (CC 84)

Modulation Wheel on;off (CC 85)

Aftertouch on;off (CC 86)

Velocity on;off (CC 87)

Filter Velocity on;off (CC 88)

Glide Switch on;off (CC 89)

Legato on;off (CC 90)

Vermona Mono lancet Specifications

General

Brand	Vermona
Model	Mono lancet
Category	Music Equipment
Language	English