H
Fig 8
I
tig7
t
lio 6
H
fio 5
E
Fio 4
I The effective use area
is
'10cm
x 10cfi1
I The stencil
measures an area 10cm
x 5cm for convenaence
(Fig
4). You can therefole
ma* out two
stencil areas using the
marker crayon
(tig
5). Stencil
afeas can be
marked out either side by side or
one above the othef
as illunEted
(tig
6).
(MaIkeI
trayon can be easily
removed using a damp cloth
or cotton wool).
I
lhoroughly clean skin as
described in
page
6.
lt
is
.ec0mmended that body aPPlication
should be after
a bath or showet
I
Apply conductive
gel
on
to area
you
have ma(ed out
fot application
(tig
7).
I switch 0n Unit and select
Body Rollef
Mode.
I
Making sure
your
finger and
thumb afe touthing chrome
condudive strips each side of
unit,
place
roller on area of use
(tig
8).
I
Unit
will bleep twire when
rollef touthes skin and
green
tED will tome on.
I
Gently roll the roller back and
forth within the 10cm squate
marked out. Make sure the
toller does
not lose contact with the skin.
lf
this
happens unit will bleep
3 times and switch off.
You then
have to tun unit on
again and select Body
Roller mode.
I
A cycle
is 2 x
5
minute intervals
with
a
1 minute fest
period
after
first 5
minutes. Total cycle 11 minutes.
Duing the rest
peri0d
the contact
LED will flash. Ihe contact iED
will
stay on duing the application
time as long as
the roller remains in
contact with the skin.
Do
not remove Roller
from contad with the skin even
in the rest
period.
lf this happens
3 bleeps will sound and
the unit will switch
ofl
Switch
the unit on again and
select Body Roller Mode.
I Mark out
a
new 10cm square
and apply to a new atea
as abOve.
t
Gently
pull
out hairs in direction
of
growth
using
tweezers
pfovided.
Do
not
exceed
I cyde ol 11 minutes
in the same area
per
day. Do
not exceed 6 daily cydes
per
week in the
same 10cm square
application
area.
To Next Page
Loading...
