VXA-300 PILOT III OPERATING MANUAL
48
MENU
(
“SET”
)
MODE
10
[
DWMD
]
Function: Selects the Dual Watch/Priority Function.
Available Values: DW/PRI
Default Setting: DW
“DW” mode:The VXA-300 will activate the Dual Watch
feature when you press
[
F
]
[
SCAN
(
DW
)]
.
“PRI” mode: The VXA-300 will activate the Priority fea-
ture when you press
[
F
]
[
SCAN
(
DW
)]
.
11
[
POBP
]
Function: Select the Power on Beep.
Available Values: MD1/MD2/MD3/oFF
Default Setting: MD1
Note: You will hear the different selections as you rotate
the DIAL selector knob.
12
[
IMIC
]
Function: Internal Microphone On/Off.
Available Values: on/oFF
Default Setting: oFF
This controls the status of the radio’s internal microphone
when an external microphone (such as the MH-44B4B
Speaker Microphone or an aviation headset connected via
the CT-96 Headset Cable) is in use. In most applications,
set 12
[
IMIC
]
to “oFF” for proper operation (this disables
the internal microphone). The internal microphone will still
function normally when the external microphone is dis-
connected.
13
[
EMRG
]
Function: Emergency channel On/Off.
Available Values: on/oFF
Default Setting: on
This controls the operation of the Emergency
[
121.5
]
key.
When set to “oFF,” this key will not function. You can still
use the frequency 121.5 MHz either by entering it on the
keypad in the VFO mode, or by recalling it on a previ-
ously-stored memory channel.
To Next Page
Loading...
Need help?
General
