EasyManuals Logo

Vertex Standard VX-170 User Manual

Vertex Standard VX-170
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
PERATING MANUAL
41/64
Vertex Standard Co., Ltd.
Autodial memory register. For purposes of this example, we will use “#123” as the
access code.
A. Press the [F/W] key, then press the [0(SET)] key to enter the Set mode.
B. Rotate the DIAL knob to select Set Mode Item 17: DT WRT.
C. Press the [F/W] key to enable adjustment of this Set Mode Item.
D. Rotate the DIAL knob to select the DTMF Memory register (“d1” ~ “d9”) into which
you wish to store the access code.
E. Press the [F/W] key momentarily. The first digit will blink.
F. Rotate the DIAL knob to select “F” (representing DTMF “#”: the first digit of the
DTMF string).
G. Press the [F/W] key momentarily to accept the first digit and move to the second
digit of the DTMF string.
H. Repeat the previous steps until you have completed the access code (“#123”).
I. Press and hold in the [F/W] key for one second to save the setting.
2. Press the PTT switch to exit to normal operation.
3. Press the [F/W] key, then press the [0(SET)] key to enter the Set mode again.
4. Rotate the DIAL knob to select Set Mode Item 22: I NET.
5. Press the [F/W] key to enable adjustment of this Set Mode Item.
6. Rotate the DIAL knob to set this Set Mode Item to “INT.MEM” (thus activating the “Other
Internet Link System” mode).
7. Press the PTT switch to save the new settings.
8. Press the [0(SET)] key momentarily to activate the Internet Connection feature. The “%”
icon will appear in the upper right corner of the display.
9. Press and hold in the [%(0)SET] key for one second, rotate the DIAL knob to select the
DTMF access number (“IMEM 1” ~ “IMEM 9”) corresponding to the Internet link repeater
to which you wish to establish an Internet link, then press the PTT switch momentarily to
lock in the selected access number.
10. Once the Internet Connection feature is activated per step 8 above, you may now press
the [0(SET)] key, while you are transmitting, to send out the selected DTMF string (to
establish the link to the desired Internet-link mode).
To return to the WIRES
mode, repeat steps 3 - 6 above, selecting “INT.COD” in step 6.
ARTS
(Automatic Range Transponder System)
The ARTS
feature uses DCS signaling to inform both parties when you and another
ARTS
-equipped station are within communications range. This may be particularly useful

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vertex Standard VX-170 and is the answer not in the manual?

Vertex Standard VX-170 Specifications

General IconGeneral
BrandVertex Standard
ModelVX-170
CategoryRadio
LanguageEnglish

Related product manuals