Various components such as compressors, refrigerant discharge lines, and humidifiers are extremely hot during the unit
operation. Therefore, allow suicient time for the unit to cool down before working with the unit. Handle the unit with
extreme caution and wear safety gears such as protective gloves, safety shoes, and arm protection while working with the
hot compressors, discharge lines, and reheats.
There is a risk of water leaking that can damage both the equipment and the building. Eective water drain connection and
facilities should be available. Installation should be precise. Implementation of the application and service practices should
be appropriate and fault-free. Failure to comply with these norms will result in water leakage from the unit. Water leakage can
lead to massive damage and loss of critical equipment in the hosting ecosystem. Therefore, care should be taken to ensure
that the unit is not located directly above any equipment that could sustain damage due to water and excessive moisture.
Use of a leak detection system for the unit and system supply lines are recommended by Vertiv Co.
To Next Page
Loading...
Need help?
General
