Need help?Do you have a question about the Vertiv Liebert EXM External Battery Cabinet and is the answer not in the manual?
General| Product Type | External Battery Cabinet |
|---|---|
| Compatibility | Liebert EXM UPS |
| Mounting | Floor-standing |
| Enclosure Rating | IP20 |
| Dimensions (H x W x D) | Varies by model, refer to specific model datasheet |
| Weight (Empty) | Varies by model, refer to specific model datasheet |
| Weight (Fully Loaded) | Varies by configuration |
| Weight (Approximately) | 300 lbs |
| Battery Type | Valve-Regulated Lead-Acid (VRLA) |
| Battery Capacity | Varies by model, refer to specific model datasheet |
| Number of Battery Modules | Varies by configuration |
| Input Voltage | Varies by configuration |
| Output Voltage | Varies by configuration |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Relative Humidity | 0% to 95% non-condensing |
| Cooling | Natural convection |
| Model | Liebert EXM |
Introduction to mechanical installation requirements for positioning and cabling.
Explanation of how a battery system is composed of multiple equipment cabinets.
Pre-installation checks including inspection for shipping damage and verification of equipment.
Details temperature consistency requirements for battery longevity and capacity.
Details mounting the equipment on a pedestal for raised floor installations.
Emphasizes special care when working with batteries due to high voltages and potential hazards.
Describes busbar connections for cabinets bolted together.
Covers customer-supplied cables for stand-alone or right-mounted cabinets.
Instructions for placing UPS/cabinets on raised floors using pedestals.
Details how cables enter cabinets via removable plates and conduit requirements.
Details the Auxiliary Terminal Block (J22) for battery cabinet interface.
Explains the low battery warning and its configurable duration.
Describes the shutdown procedure when battery voltage drops below EOD.
Instructions for setting up and maintaining a log for scheduled checks and conditions.
Provides warnings and safety precautions for battery maintenance procedures.
To Next Page