Need help?Do you have a question about the VESTEL Dishwasher and is the answer not in the manual?
General| Brand | VESTEL |
|---|---|
| Model | Dishwasher |
| Category | Dishwasher |
| Language | English |
Button is assembled in the control panel unit.
Mechanical lock/release system for closing the door and controlling electrical connections.
Details on the washing pump, including voltage, frequency, power, and coil specifications.
Specifications for the capacitor, permanently connected to circulation pump coils.
Technical details for the drain pump: voltage, frequency, power, flowrate, and resistance.
Specifications for the water inlet valve: voltage, frequency, power, flowrate, and coil class.
Description of the Eco component providing a connection between sump and washing pump.
Information on the NTC sensor, including temperature-resistance characteristics.
Technical specifications for the pressure switch, including voltage and contact details.
Details on the regeneration valve: voltage, frequency, power, and resistance.
Function and specifications of the parasite filter to prevent main supply interference.
Specifications of the power cord: type, insulation, plug, and length.
Dimensions and electrical specifications for the drain hose.
Description of the detergent and rinse aid dispenser assembly.
Operation of the power on/off button and associated indicator light.
Function of the door handle for opening and closing the appliance door.
How to start, pause, and resume programs using the Start/Pause button.
Method for selecting washing programs using the control knob.
Interpreting program status via indicator lights on the control panel.
Significance of the low salt indicator and action required.
Monitoring the washing cycle progress using indicator lights.
Procedure for modifying a program during operation.
Steps to terminate an active washing program.
Instructions for removing the top plate of the dishwasher.
Steps to safely detach and remove the front panel.
Procedure for removing the lower plastic kick plate.
Steps for detaching and removing the side panels.
Instructions for removing the kick plate sheet iron.
Steps to remove the control panel assembly and its connections.
Procedure for removing the door lock mechanism.
Steps to detach and remove the detergent dispenser.
Instructions for accessing components within the dishwasher door.
Steps for removing the NTC sensor and thermal protector.
Procedure for removing the air-break component from the machine.
Instructions for removing the hose connection plastic part.
Steps to safely detach and remove the power cord.
Steps for removing the regeneration valve assembly.
Procedure for detaching and removing the drain pump.
Instructions for removing the washing pump.
Steps to detach and remove the Eco component.
Procedure for removing the water softener unit.
Steps to remove the parasite filter from the appliance.
Instructions for detaching and removing the floater component.
Procedure for removing the water inlet valve.
Steps to detach and remove the draining hose.
Instructions for removing the lower basket.
Steps for detaching and removing the upper basket.
Steps for removing the course, micro, and metal filters from the tub.
Instructions for detaching and removing the basket rails.
Steps for removing the upper and lower spray arms and their connections.
Table detailing resistance values for various components for troubleshooting.
Procedure for measuring electrical values on the electronic card.
Instructions for measuring primary and secondary windings of the washing pump.
Procedure for measuring the drain pump resistance via the electronic card.
Steps for measuring the water inlet valve resistance from the electronic card.
Procedure for measuring the detergent dispenser resistance.
Instructions for measuring the regeneration valve resistance.
Procedure for measuring the pressure switch resistance from the electronic card.
Steps for measuring the NTC sensor resistance from the electronic card.
Procedure for measuring the ON/OFF button resistance.
Instructions for measuring the door switch resistance from the electronic card.
Procedure for checking the floater by controlling specified value intervals.
To Next Page
