VESTEL EVC04 Series User Manual

Benutzerhandbuch
User Manual
ELECTRIC VEHICLE CHARGER
EVC04 Series

VESTEL EVC04 Series Specifications

General

Model	EVC04 Series
Connector Type	Type 2
Maximum Output Current	32A
Protection Degree	IP54
Communication Protocol	OCPP 1.6
Charging Standard	IEC 61851
Input Voltage	400V AC
Output Voltage	230V AC
Maximum Output Power	7.4 kW

Summary

SAFETY INFORMATION

SAFETY WARNINGS

Keep manual safe, check voltage, do not operate if damaged, observe temperature/humidity limits.

GROUND CONNECTION WARNINGS

POWER CABLES, PLUGS and CHARGING CABLE WARNINGS

GENERAL INFORMATION

1 - INTRODUCTION OF THE PRODUCT COMPONENTS

Overview of product components for Socket Equipped and Tethered Cable Models.

1.2 - MID MODELS

Details regarding MID (Measuring Instruments Directive) meter models of the charging station.

2 - PLUG CHARGING CABLE

2.1 - SOCKET EQUIPPED MODEL

Procedure for plugging the charging cable into the socket outlet.

3 - BEHAVIOUR OF THE STATUS INFORMATION LED

DESCRIPTION

1 - MODEL DESCRIPTION

Detailed breakdown of the EVC04 model naming convention and its components.

TECHNICAL SPECIFICATIONS

AC Maximum Charge Output

Specifies the maximum charging power output for the EVC04 series.

Required Circuit Breaker on AC Mains

Specifies the type and rating of the circuit breaker required for AC mains connection.

CONNECTIVITY

Ethernet

Details Ethernet connectivity options and speeds.

AUTHORIZATION

RFID

Specifies the RFID standards supported for authorization.

MECHANIC SPECIFICATIONS

Size

Provides the physical dimensions of the charging station.

ENVIRONMENTAL TECHNICAL SPECIFICATIONS

Usage Conditions

Specifies operating temperature, humidity, and altitude limits.

CHARGING

1.1 - AUTOSTART CHARGING MODE

Describes the automatic charging mode activated by connecting the cable or deleting the last RFID card.

1.1.1 - SOCKET EQUIPPED MODEL

1.1.1.1 - VEHICLE CONNECTION & CHARGING

Step-by-step guide for connecting vehicle and starting charging for socket models.

1.1.2 - ATTACHED CABLE MODEL

1.2 - RFID AUTHORIZED MODE

1.2.1 - REGISTERING USER RFID CARD

How to register user RFID cards for authentication and charging.

1.2.2 - VEHICLE CONNECTION & CHARGING

Steps for connecting vehicle and charging using RFID for socket models.

1.2.2.2 - ATTACHED CABLE MODEL

1.3 - SMART APPLICATION AUTHORIZED MODE (Optional with Wi-Fi)

1.3.1 – CONFIGURING DRIVE GREEN APPLICATION

Instructions for configuring the charger using the Drive Green smartphone application.

1.3.3.1 - SOCKET EQUIPPED MODEL

Steps for vehicle connection and charging with smart app for socket models.

1.3.3.1.2 - STOP CHARGING

1.3.3.2 - ATTACHED CABLE MODEL

1.3.4 - APPLICATION MODES

1.3.4.1-ECO CHARGE MODE

Function to set charging periods based on electricity usage peak hours for cost savings.

1.4 - RFID LOCAL LIST AUTHORIZED MODE & ACCEPT all RFIDS MODE

1.4.1 - SOCKET EQUIPPED MODEL

Procedures for vehicle connection and charging using local RFID list or accept all RFIDs.

1.4.2 - ATTACHED CABLE MODEL

2 - OCPP CENTRAL SYSTEM CONNECTED MODE (Optional)

2.1 - SOCKET EQUIPPED MODEL

Procedures for vehicle connection and charging when connected to an OCPP central system.

2.2 - ATTACHED CABLE MODEL

2.3 - OCPP 1.6 JSON ADDITIONAL FEATURES

2.3.1 - RESERVATION FEATURE

Allows users to reserve the charging station for a specific period.

LOCKED CABLE FUNCTION (Model with Socket)

ERROR AND FAULT CONDITIONS

1 - GENERAL ERROR CONDITION

Describes how to handle a constant red status LED, suggesting restart or service.

3 - TRIPPING RELAY ON PRODUCTS WITH RESIDUAL CURRENT DEVICE

3.1 TRIPPING THE RESIDUAL CURRENT DEVICE

Procedure for accessing and resetting the residual current device.

CLEANING AND MAINTENANCE