Address：Baoshanqu Shuangchenglu 803long 11hao
1602A-1609shi Shanghai
Imported to USA: Sanven Technology Ltd., Suite 250,
9166 Anaheim Place, Rancho Cucamonga, CA 91730
Part 10: Precautions for common problems
1.Please select the correct COM port for connecting the software and
equipment, and the baud rate should be selected: 115200, to ensure
that the connection between the computer port and the USB cable is
not loose.If you need laser assistance for tuning, please:
2.Before engraving, please confirm whether each mechanism is loose
(synchronous belt, eccentric column of roller, and laser head are loose
or shaken)
3.Correctly adjust the focus and confirm that the distance from the
end of the laser protective cover to the engraving is Fixed-focus film
thickness.
4.LaserGRBL/LightBurn software can refer to the parameter table in
the corresponding manual for engraving and cutting different materials.
The engraving of mirror metal requires manual surface blackening
treatment.
MADE IN CHINA
To Next Page
Loading...