IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
NOTICE:
1. Read all instructions.
2. Local codes regarding installation vary greatly from one area to another. The
National Fire Protection Association, Inc., states in its latest edition of NFPA96 that
local codes are “Authority Having Jurisdiction” when it comes to requirements for
the installation of equipment. Therefore, installation should comply with all local
codes.
WARNING:
For your safety, do not store or use gasoline or other flammable vapors or liquids
in the vicinity of this or any appliances. Keep the area free and clear of
combustible materials. (See ANSI Z83. 14B, 1991.)
WARNING:
Improper installation, adjustment, alteration, service, or maintenance can cause
property damage, injury, or death. Read the installation, operating, and
maintenance instructions thoroughly before installing or servicing this equipment.
CAUTION:
These models are designed, built, and sold for commercial use only. If these
models are positioned so the general public can use the equipment, make sure
that cautions, warnings, and operating instructions are posted near each unit so
that anyone using the equipment will use it correctly and not injure themselves or
harm the equipment.
NOTICE:
When installed, the unit must be electrically grounded and comply with local codes,
or in the absence of local codes, with the national electrical code ANSI/NFPA70-
To Next Page
Loading...