VEVOR CUT-50 - Page 7

Adjust cutting air pressure.
Pressure
Reducing
Valve
4

air leakage
Electrode

to be replaced frequently. Please
keep stock.
12
11
M4 screws are used to x the cable
suppo to the machine.
The cable holder needs to be xed to
the machine. It can store the power
cable, ground wire or welding torch.

be replaced frequently. Please keep
stock.
Copper Nozzle
Pressure
Reducing
Valve Outlet
Connector
Quick gas connector ensures
direct plug-in.
Adapter
Screw
Cable Holder
4
2
• 
compatible with dual voltage devices

220V to 110V or vice versa)
• Check your device’s voltage to ensure it

05