CUT50 Plasma cutting machines will be subjected to various strict tests before leaving
the facto. This is for ensuring that each welding machine that reaches the user is of high
quality. Because our machines have to go through tens of thousands of kilometers of
long-distance transpoation from the facto to your hands. In this process, it’s
inevitable that some uncontrollable factors will lead to the loosening or even damage of
some components inside machine. We recommend that you check its external as soon as
you get the welder, and turn on the power to check if you have received a qualied product.
Tips:
1. Wear a welding helmet with appropriate lters to protect your face and eyes when
welding or watching.
2. Wear approved safety glasses. Side shields are recommended.
3. Use protective screens or barriers to protect others from ash and bright lights and
warn others not to watch the arc.
4. Wear protective clothing made from durable, ame-resistant material (wool and
leather) and foot protection.
5. If there is too much noise, use approved earplugs or earmus.
MACHINE OPERATION GUIDANCE
SIMPLE TEST FOR POWERING ON THE MACHINE
1. Please make sure your power supply voltage is 110V±10%/ 220V±10%.
2. It is recommended to choose 50A circuit breaker protection.
3. Please choose the power plug that suits your local electrical law requirements for
this machine.
4. Extension cord: Choose #12 AWG or larger one; choose 25’ (8m) or shoer one.
2 PRECAUTIONS FOR POWER-ON INSPECTION:
07
To Next Page
Loading...