Place the machine on a steady
and even place before using!
For the first use, make a punch with blotting paper to suck up
excess lube from the blade
1. Punching Operation
Move the slider for paper format to the
proper position according to the paper
format of the document, and then insert
the document and press down the lever.
2. Binding Operation
Punch the paper sheets needing binding.
Insert the punched sheets (cover sheet
first) onto the comb.
Put on the comb with opening on top, and
press the lever backwards.
Release the lever and take out the
document. Done!
To Next Page
Loading...