BIOS Setup
31
CPU FEATURE
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Item Help
CPU Feature
Phoenix - AwardBIOS CMOS Setup Utility
Thermal Management
[Thermal Monitor 1]
TM2 Bus Ratio
[0.700V]
C7 CMPXCHGB
[Enabled]
Deplay Prior to Thermal
[16 Min]
TM2 Bus VID
[ 0 X]
C7 NoExecute (NX)
[Disabled]
Deplay Prior to Thermal
Settings: [4 Min, 8 Min, 16 Min, 32 Min]
Thermal Management
This item sets CPU’s thermal control rule to protect CPU from overheat.
Setting Description
Thermal Monitor 1 On-die throtting
Thermal Monitor 2 Ratio & VID transition
TM2 Bus Ratio
This item sets the frequency (bus ratio) of the throttled performance that will
be initiated when the on die sensor goes from not hot to hot.
Key in a DEC number.
Settings: [Min = 0, Max = 255]
To Next Page
Loading...
Need help?
General
