Chapter 3
36
AGP & P2P BRIDGE CONTROL
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Item Help
AGP & P2P Bridge Control
Phoenix - AwardBIOS CMOS Setup Utility
AGP Aperture Size [128M]
AGP 2.0 Mode [4x]
x AGP Driving Value
DA
AGP Driving Control [Auto]
AGP Master 1 WS Write
AGP Fast Write [Disabled]
[Enabled]
AGP 3.0 Calibration cycle [Enabled]
AGP Master 1 WS Read [Enabled]
Direct Frame Buffer
VGA Share Memory Size [64M]
[Enabled]
AGP Aperture Size
This setting controls how much memory space can be allocated to AGP for
video purposes. The aperture is a portion of the PCI memory address range
dedicated to graphics memory address space. Host cycles that hit the
aperture range are forwarded to the AGP without any translation.
Settings: [32MB, 64MB, 128MB, 256MB, 512MB, 1G]
AGP 2.0 Mode
This mainboard supports the AGP 4x interface. When the AGP 4x video card
is used, it can transfer video data at 1066MB/s. AGP 4x is backward
compatible, leave the default 4x mode on. AGP 4x mode can be detected
automatically once you plug in the AGP 4x card.
Settings: [4x, 2x, 1x]
To Next Page
Loading...
Need help?
General
