EPIA ML-Series Operating Guide
VIA EPIA ML-Series Specifications
VIA EPIA ML Specifications
Processor - VIA C3™/ VIA Eden™ EBGA processor
Chipset
- VIA CLE266 North Bridge
- VIA VT8235 South Bridge
System Memory
- 1 DDR266 DIMM socket
- Up to 1GB memory size
VGA - Integrated VIA UniChrome AGP Graphics
Expansion Slots - 1 PCI
Onboard IDE - 2 X UltraDMA 133/100/66 Connectors
Onboard LAN - VIA VT6103 10/100 Base-T Ethernet PHY
Onboard Audio - VIA VT1616 6 channel AC’97 Codec
Onboard I/O Connectors
- 1 USB connector for 2 additional USB 2.0 ports
- Front-panel audio connectors (mic-in and line-out)
- 1 CD Audio-in connector
- 1 Buzzer
- FIR connector
- CIR connector (Switchable for KB/MS)
- Wake-on-LAN connector
- CPU/Sys FAN/Fan 3
- 1 SM Bus connector
- 1 Serial port connector for a second com port
Back Panel I/O
- 1 PS2 mouse port
- 1 PS2 keyboard port
- 1 Parallel
- 1 RJ-45 LAN port
- 1 Serial port
- 2 USB 2.0 ports
- 1 VGA port
- 3 Audio jacks: line-out, line-in and mic-in (Smart 5.1
support)
BIOS
- Award BIOS
- 2Mbit flash memory
System Monitoring &
Management
- CPU voltage monitoring
- Wake-on-LAN, Keyboard Power-on, Timer Power-on
- System power management
- AC power failure recovery
Operating Temperature - 0 ~ 50°C
Operating Humidity - 0% ~ 93% (relative humidity; non-condensing)
Form Factor
- Mini-ITX (4 layer)
- 17 cm x 17 cm
* The specification is subject to change without prior notice.
January 04, 2005 - 3 - Version 1.3
To Next Page
Loading...
Need help?
General
