3333
3333
33
IDE Channel These categories identify the types of the two channels that
0/1 have been installed in the computer.
If the controller of the HDD interface is SCSI, the selection shall
be “None”.
Drive A / This category identifies the driver types which have been installed
Drive B in the computer.
Video The default setting is EGA/VGA.
Halt on You can select which type of error will cause the system to halt.
Advanced BIOS FeaturesAdvanced BIOS Features
Advanced BIOS FeaturesAdvanced BIOS Features
Advanced BIOS Features
This section allows you to configure your system for basic operation. You have the
opportunity to select the system’s default speed, boot-up sequence, keyboard operation,
shadowing and security.
Advanced Chipset FeaturesAdvanced Chipset Features
Advanced Chipset FeaturesAdvanced Chipset Features
Advanced Chipset Features
The Chipset Features Setup option is used to change the values of the chipset registers.
These registers control most of the system options in the computer.
This section allows you to configure the system based on the specific features of the
installed chipset. This chipset manages bus speeds and access to system memory
resources, such as DRAM and the external cache. It must be stated that these items
should not be altered. The default settings have been chosen because they provide the
best operating conditions for your system.
Integrated PeripheralsIntegrated Peripherals
Integrated PeripheralsIntegrated Peripherals
Integrated Peripherals
The Integrated Peripherals Setup allows the user to configure the onboard IDE controller,
floppy disk controller, the printer port and the serial ports.
Power Management SetupPower Management Setup
Power Management SetupPower Management Setup
Power Management Setup
The Power Management Setup Menu allows you to configure your system to save the
most energy while operating in a manner consistent with your own style of computer
use.
PnP/PCI ConfigurationsPnP/PCI Configurations
PnP/PCI ConfigurationsPnP/PCI Configurations
PnP/PCI Configurations
This section describes how to configure the PCI bus system. This section covers some
very technical items and it is recommended that only experienced users should make
any changes to the default settings.
PC Health StatusPC Health Status
PC Health StatusPC Health Status
PC Health Status
The PC Health Status displays CPU and Case Fan Speed etc.
To Next Page
Loading...
Need help?
General
