To Next Page

To Previous Page

3737

Create Disk Array

1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to

select the Create Array command and press <Enter> to call out the list of creation

steps.

VIA Tech. VT8237 Series SATA RAID BIOS Ver 4.90



Auto Setup For Data Security Create a RAID array with



Array Mode RAID 1 (Mirroring) the hard disks attached to



Select Disk Drives VIA IDE controller



Start Create Process

F1 : View Array/disk Status

ÏÐ : Move to next item

Enter : Confirm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.

Just highlight the target array mode that you want to create, and press <Enter> to

confirm the selection.

VIA Tech. VT8237 Series SATA RAID BIOS Ver 4.90



RAID 0 for performance Create a RAID array with



RAID 1 for data protection the hard disks attached to

VIA IDE controller



RAID SPAN for capacity