Apr/05 MN0VIA621206
9
Figure 4
5. Click “Next” again to confirm the driver and begin installation.
Please insert the disk labeled “Windows 98 CD disk”.
6. After driver installation finished, click “Finish”.
7. Next, you will see Windows find a “VIA Tech 3038 PCI to USB
Universal Controller” device again. Repeat the above process for the
second “VIA Tech 3038 PCI to USB Universal Controller”.
8. As “PCI Universal Serial Bus” driver search program shows up, as
Figure 5. Click “Cancel” to cancel the driver installation for this
device. This driver will be installed from the included Driver CD.
To Next Page
Loading...