OP700 / OH850
OmniPAP Description
Main Features
22
Intended Use
The OmniPAP system is intended to be used in the treatment of adult OSA
(Obstructive Sleep Apnea).
Upgradable Function
By connecting with the Integrated Upgrading Component, the OmniPAP CPAP
system can be easily upgraded to APAP system with more powerful function.
The air pressure delivered can change from only one constant air pressure to
automatically increasing/decreasing the pressure depending on the condition of
airway for you to experience a much more comfortable treatment in an
economical way.
Ramp Feature
OmniPAP system provides "Ramp Function," which gradually increases the
pressure to the prescription pressure setting in a preset period of time to allow
you to fall asleep more comfortably.
Auto ON/OFF
When Auto ON/OFF is enabled, air delivery will start automatically after you
breathe into the mask for 3 to 5 times, and the air delivery will automatically
stop and return to Standby Mode after you remove the mask from your face for
30 to 60 seconds.
Altitude Compensation
The altitude where the OmniPAP system is used may influence the output
pressure. Altitude Compensation can help OmniPAP system deliver pressure
closer to the prescription pressure setting at higher altitude.
To Next Page
Loading...
Need help?
General