EasyManua.ls Logo

Viatek FlexHeat - Caring for Electrode Pads

Viatek FlexHeat
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• Do not put Lotion on your skin prior to using electrodes.
Electrodes last longer when used on clean dry skin.
• The electrode pads can be reused as long as they retain their
stickiness. Cover the pads with the included film pieces when not
in use to prevent them from drying out.
• Storing the pads in a plastic zip bag will help prevent the gel
pads from drying out prematurely.
• Properly cared for, the electrode pads may last up to 50 uses;
the life of the electrode pad is largely dependent upon proper
care and condition of the skin as applied for use.
• To help prolong the life of the electrode pad, between uses,
moisten the gel side of the pad with a drop of water and allow to
dry; replace the film for storage.
• If you notice that the pads have become dry, no longer adhere
well to the skin, or begin to iritate the skin, they are in need of
replacement.