Need help?Do you have a question about the Viavi GigaStor G4-60G-040-1152T and is the answer not in the manual?
Details system deployment, storage, management, OS, and hardware specs.
Specifications related to height, width, depth, and weight.
Information about monitoring interfaces and speed.
Details on aggregate performance.
Information on power supply, frequency, voltage, and dissipation.
Details on regulatory compliance standards.
Guide to mounting the head unit and JBODs in the cabinet.
Instructions for connecting power, SAS, Ethernet, TAP/Span, IPMI cables, and transceivers.
Procedures for powering on JBOD units first, then the head unit.
Steps to configure the IP address for the appliance.
Unpacking components and attaching rail kits to the rack.
Installing JBOD and head units, connecting SAS and Ethernet cables.
Connecting LOM/IPMI, SPAN/TAP ports, and SFP transceivers.
Powering on JBODs/head unit, setting IP, time zone, and launching Observer.
Optional IPMI port configuration in BIOS.
Procedures for turning the system on and off.
Guidance on installing SFP modules and hot-swapping.
Detailed steps for setting the appliance's IP address.
Setting up the LOM/IPMI port for remote management via BIOS.
Configuring IPMI LAN settings in BIOS.
Accessing and configuring the IPMI web interface.
Changing user passwords and setting up system alerts.
Identifying rail kit parts and rack compatibility.
Steps to install inner rails onto the chassis.
How to release the inner rails from the outer rails.
Steps to install outer rails onto the rack.
Illustrates server and JBOD installation into the rack.
Steps for pulling the chassis forward and releasing latches.
To Next Page
General