Need help?Do you have a question about the Vibe Optisound Auto 8 and is the answer not in the manual?
General| Brand | Vibe |
|---|---|
| Model | Optisound Auto 8 |
| Category | Car Stereo System |
| Language | English |
Notes on the additional load an aftermarket audio amplifier places on the vehicle's charging system.
Warning regarding the amplifier's heatsink becoming hot during normal use and potential contact hazards.
Recommended procedure for running in a new subwoofer to ensure optimal performance and longevity.
Diagram and instructions for connecting the LITEAIRAUTO8A-V1 amplifier.
Diagram and instructions for connecting the LITEAIRAUTO8-V1 subwoofer.
Illustrates mounting the subwoofer enclosure behind a car seat.
Illustrates mounting the subwoofer enclosure underneath a car seat.
Illustrates mounting the subwoofer enclosure on a car's side panel.
Instructions for folding out the steel mounting tabs from the enclosure.
Instructions for securing the enclosure using four screws.
Overview of terminals and controls for the LITEAIRAUTO8-V1 model.
Overview of terminals and controls for the LITEAIRAUTO8A-V1 model.
Technical specifications for the LiteAir Optisound Auto 8 model.
Technical specifications for the LiteAir Optisound Auto 8 active model.
Steps to troubleshoot why the amplifier is not powering up correctly.
Explanation and troubleshooting for the amplifier's protection LED illuminating.
Steps to troubleshoot an amplifier that is getting excessively hot.
Checks to perform when the amplifier experiences blown fuses.
Troubleshooting steps for obtaining distorted sound from the subwoofer.
To Next Page