Read and follow these instructions when connecting and using your display:
Operation:
Keep the display out of direct sunlight and open ames, hot appliances, or any other heat sources
Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s
electronics
Do not block the ventilation holes on the Vibe
When positioning the display, make sure the power plug and outlet are easily accessible
When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the
power cord for normal operation
Ensure the use of an approved power cord at all times. If your power cord is missing, please contact
your local service center
Do not subject the display to strong vibration or high impact during operation
Avoid dropping the display during operation or transportation
This apparatus is intended to be supported by a UL Listed Wall Mount Bracket or equivalent.
Temperature: 0-40°C 32-104°
Humidity: 20-80% R
Altitude: 5000
The forward tilt of the product will affect the touch effect. The suggested
installation angle is 0°-5°.
WARNING: Use of controls, adjustments or procedures other than those specied in this
documentation may result in exposure to shock, electrical hazards and/or mechanical
hazards.
Safety Instructions
Safety precautions and maintenance
ii
Maintenance:
To protect your display from possible damage, do not put excessive pressure on the LCD panel. When
moving your display, hold the frame to lift; do not lift the display by placing your hand or ngers on
the LCD panel
Unplug the display if you are not going to use it for an extensive period of time
Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a
dry cloth when the power is off. Never use organic solvent, such as alcohol, or ammonia-based
liquids, to clean your display
To avoid the risk of shock or permanent damage to the hardware, do not expose the display to dust,
rain, water, or a moist environment
If your display becomes wet, wipe it with a dry cloth as soon as possible
If a foreign substance or water gets in your display, turn the power off immediately and disconnect
the power cord. Then remove the foreign substance or water and send the unit to the maintenance
center
Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold
In order to maintain the best performance of your display and ensure a longer lifetime, we strongly
recommend using the display in a location within the following temperature and humidity ranges:
To Next Page
Loading...
Need help?
General
