2
Caution: The Vibe board and stand are heavy and require a minimum of three people to install. Use
caution when lifting them
If screws are found missing or loose, please contact professional repair services or contact Vibe
customer service
Caution: If you choose a third-party wall mount, the wall mount chosen should be able to support 120
lbs plus the self weight of the mount
Avoid high temperature, explosive gas and strong electromagnetic interference during installation
Keep the product away from direct sunlight
To reduce the risk of re or electrical shock, do not expose this product to rain, moisture or other
liquids. Do not touch the board with wet hands. Do not install this product near ammable objects
such as gasoline or candles, or expose the board to direct air conditioning
Make sure all screws are secured properly to avoid board falling down
Please carefully read the installation manual and follow the instructions. Vibe is not liable to injuries
caused by improperly following the manual
Please contact us directly if you have any questions when reading the manual.
Stand Installation (Optional)
2.1. Vibe Assembly notes
To Next Page
Loading...
Need help?
General
