www.vibrapep.com
QUICK START: Instructions for Use
For Use with Nebulizer
1
Visually
inspect the
device for
damage
A
Assemble the nebulizer as
described in the nebulizer
supplied Instructions For
Use
B
Connect the
Valved Tee
Adapter
†
and
mouthpiece
C
Assemble
Nebulizer
to the
22mm
connector
of the
VibraPEP
D
Turn on the nebulizer and
inhale the medication
through the mouthpiece
and exhale through the
VibraPEP as in step 4
2
Insert the
Mouthpiece
into the
Therapy
Selector
VibraPEP
Oscillatory PEP
Therapy System
(OPEP)
These are abbreviated instructions for use. Always read the full instructions that are
packaged with the VibraPEP OPEP Therapy System or available at VibraPEP.com
† The Valve Tee Adapter is an optional accessory
part # 12218
3
Inhale deeply
through your
nose, then
hold your
breath for 2
to 3 seconds.
4
5
Exhale through
the VibraPEP
for 3 to 4
times longer
than your
inhalation
.
Repeat this process for 15
breaths or as instructed by your
healthcare provider.
6
Perform 2 to 3 “huff coughs” to
clear the airway.
2-3 sec.
3-4x
with Nebulizer
Breathe Easy
LIT-0197 Rev. A 2020-10-09
To Next Page
Need help?
General
