INSTRUCTIONS
Image 1
Image 2
Image 3
Image 4 Image 5
1. Place the Bottom blade (5) onto the axis (7) in the bowl (6) as the above
image (image 1).
2. Attach the top blade (4) on the blade (5) on the axis of the bottom blade (5) as
the above image (image 2).
3. Place in small pieces the ingredients to be chopped in the bowl (6).
4. Fit the lid (3) on to the bowl (6) (image 3).
5. Place the motor unit (2) on to the bowl/lid (3) (image 4).
6. Connect the appliance to the power supply.
7. Press the control switch (1) and keep it pressed in, the appliance will start to
work (image 5).
8. Release the control switch (1) and wait for the blade (4 and 5) to stop.
Remove the motor unit (2).
9. Remove the lid (3) and then remove the blades (4 and 5) carefully.
10. Unplug the appliance after you use it.
1. Control switch
2. Motor unit
3. Bowl lid
4. Top Blade
5. Bottom Blade
6. Bowl
7. Axis for blade
To Next Page