6
1. Power: With the power switch in the OFF position, plug the filled humidifier into a polarized
120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; It will only fit one
way. DO NOT plug in humidifier with wet hands to avoid electric shock.
2. Output: Set the control to your desired output setting. It is recommended you set the
output to high until you reach a comfortable humidity level.
Indications your humidifier is operating are that the green nightlight on the control knob will
illuminate and after 10-15 seconds your humidifier will produce a visible mist.
3. Humidity Level: Once you have reached a comfortable humidity level your humidifier
should be turned to a lower setting. A comfortable humidity level is between 40-60%.
To monitor your humidity level it is recommended you use a hygrometer such as the
Vicks V70 or V70-CAN model.
If you notice condensation on the walls or windows you should turn your humidifier off as
your humidity level is too high.
4. CAUTION: DO NOT OPERATE YOUR HUMIDIFIER WITHOUT THE TANK IN PLACE OR IF THE
UNIT IS EMPTY.
CAUTION: WHEN MOVING HUMIDIFIER, TURN OFF AND UNPLUG THE HUMIDIFIER
Operating Instructions V4600 Series
Step 1 Step 2 Step 3 Step 4
ENGLISH
To Next Page
Loading...
Need help?
General
