Vicks FilterFree - Disinfecting Directions; Re-Assembling the Humidifier

9
Disinfecting Directions - Disinfect Following Scale Removal
Weekly Care And Cleaning (Continued from page 8)
1. Add 1 Teaspoon of bleach to 1 gallon (3.8L) water.
2. Add ½ to ¾ gallon (1.9-2.8L) of water/bleach solution to water reservoir of the main
housing and water tank.
3. Follow steps 5 through 8 from the scaling section (page 8).
Note: Please be careful of clothing, rugs and other non bleach resistant materials
when disinfecting. Spilling bleach on clothing, rugs and certain surfaces may
cause damage.
NOTE: USING MORE THAN 1 TEASPOON OF BLEACH PER GALLON (3.8L) OF WATER
WILL RESULT IN DAMAGE TO YOUR HUMIDIFIER.
Re-Assembling
1. Snap mist nozzle back into opening on top of tank.
2. Assemble water cap back on base of tank.
3. Place tank back onto base of unit.
1
g
a
l
(1 TSP)
1
g
a
l
(1 TSP)
Step 1
Step 1
Step 3
Step 2
Step 2