Vico-DS2
Full HD
car camcorder
37 / 53 Copyright© VicoVation®
+2 +1 to make image brighter.
-2 -1 to reduce image brightness.
G-Sensor Value
Vico-DS2 can auto detect collisions to auto-trigger emergency
recording by built-in G-sensor, avoiding important events overwriting.
In order to avoid false alarms,
default setting on G-Sensor function
is OFF. Please activate this function manually after Vico-DS2
installation done in vehicle.
After activating G-sensor function in menu, Vico-DS2 will start
auto-detecting after 15 sec recording on each rebooting
, in order to
reduce any false alarms happening.
There are 7 different sensitivity levels in G-sensor setting. Level 7 is