Need help?Do you have a question about the Victory Motorcycles 2005 Kingpin and is the answer not in the manual?
General| Engine Type | 4-stroke 50° V-Twin |
|---|---|
| Displacement | 1507 cc |
| Fuel System | Electronic Fuel Injection |
| Horsepower | 92 HP |
| Final Drive | Belt |
| Cooling | Air / Oil |
| Torque | 106 lb-ft |
| Transmission | 5-speed |
| Front Suspension | 43 mm telescopic fork |
| Rear Suspension | Single Shock |
| Rear Brake | 300 mm floating rotor with 2-piston calipers |
| Front Tire | 130/70R18 |
| Rear Tire | 180/55R18 |
| Wheelbase | 65.6 inches |
| Seat Height | 26.5 in |
| Fuel Capacity | 4.5 gal |
| Bore x Stroke | 97 mm x 102 mm |
Provides an overview of the manual's purpose and importance for motorcycle operation.
Explains the meaning of safety signal words and symbols used throughout the manual.
Covers safe riding practices, protective apparel, and weight limits for safe operation.
Details the location of safety labels and how to report vehicle defects.
Identifies components on the handlebars and various views of the motorcycle.
Explains the location and purpose of VIN and engine identification numbers.
Describes the ignition switch, key functions, and starting positions.
Explains the speedometer, odometer, and various warning lights.
Details the operation of levers and switches on both left and right handlebars.
Covers gear shift, brake pedals, and the fuel cap operation.
Information on removing side covers and operating the sidestand.
Procedure for verifying the functionality of lights, signals, and indicators.
Steps to inspect and maintain engine oil and brake fluid levels.
Guidance on inspecting tires and brake components for safety.
Procedures for inspecting front/rear suspension, steering, and drive belt.
Instructions for inspecting fasteners and the condition/operation of the sidestand.
Guidelines for initial engine operation and starting procedures.
Details on transmission operation, shift points, and acceleration techniques.
Procedures and safety tips for effective braking and engine shutdown.
Instructions for safely parking the motorcycle in various conditions.
Overview of required services and interval tables for keeping the motorcycle in good condition.
Procedures for changing engine oil and oil filter to maintain engine health.
Instructions for checking and adjusting drive belt tension and condition.
Guidance on checking tire pressure, condition, tread depth, and wheel spokes.
Procedures for checking and maintaining brake levers, pedals, fluid, pads, and discs.
Information on battery care, charging, installation, and fuse replacement procedures.
Instructions for sidestand lubrication, inspection, and checking all motorcycle fasteners.
Guidelines for washing, drying, and protecting the motorcycle's finish.
Instructions for waxing, polishing, and caring for windshields and leather saddlebags.
Steps for preparing the motorcycle for long-term storage, including fuel and engine protection.
Guidance on battery care, covering the motorcycle, and removal from storage.
Information on noise control, emissions warranty, and owner responsibilities.
Details exclusions, limitations, and liability clauses within the warranty.
Technical data including dimensions, weight, capacities, and engine details.
Information on recommended fuel types and engine oil.
Explains the VIN and its significance for registration and parts.
Details the location and importance of the engine identification number.
To Next Page
