Victory Motorcycles 2011 Cross Roads User Manual

PMS 419
2011 Rider's Manual
Victory Cross Country
TM
Victory Cross Roads
TM

Victory Motorcycles 2011 Cross Roads Specifications

General

Year	2011
Manufacturer	Victory Motorcycles
Model	Cross Roads
Category	Cruiser
Engine Type	4-stroke, 50° V-twin
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Compression Ratio	9.4:1
Fuel System	Electronic Fuel Injection with dual 45mm throttle bodies
Cooling System	Air / Oil
Transmission	6-speed
Final Drive	Belt
Front Suspension	Telescopic Fork, 43mm
Front Brake	Dual 300mm floating rotor with 4-piston calipers
Rear Suspension	Single, Mono-tube Gas
Rear Brake	300 mm floating rotor with 2-piston caliper
Front Tire	130/70R18
Rear Tire	180/60R16
Seat Height	26.3 inches
Fuel Capacity	22.7 liters
Colors	Black, Blue

Summary

Safety

Instruments, Features and Controls

Instrument Cluster (Cross Roads)

Details the speedometer, indicator lamps, and multi-function display for the Cross Roads model.

Left Handlebar Switches

Explains the function of switches on the left handlebar, including hazard, high/low beam, horn, and turn signals.

Right Handlebar Switches

Details the engine stop/run switch, cruise control switches, and engine starter switch on the right handlebar.

Clutch and Throttle Control Operation

Explains operation of the clutch lever and throttle control grip for managing motorcycle functions.

Brake System Overview

Covers the front brake lever, rear brake pedal, and the importance of using both for maximum braking.

Pre-Ride Inspections

Electrical System Checks

Procedures for inspecting electrical components like headlamp, signals, indicators, and switches.

Engine and Fuel Level Checks

Instructions for checking engine oil level and fuel level before riding.

Tire and Brake System Checks

Inspection of tires, brake operation, fluid levels, and brake components.

Throttle, Clutch, and Suspension Checks

Drive Belt, Sidestand, and Fastener Checks

Operation

Engine Break-In Procedures

Guides on the critical wear-in procedures for the first 500 miles to ensure engine durability.

Fueling the Motorcycle

Starting the Engine

Details the procedure for starting the engine, including pre-ride checks and starter interlock system.

Shifting Gears

Explains the six-speed transmission, neutral location, and procedures for upshifting and downshifting.

Accelerating the Motorcycle

Braking Procedures

Details proper braking techniques, emphasizing gradual application and avoiding curves.

Parking the Motorcycle

Maintenance

Periodic Maintenance Schedule

A table detailing recommended maintenance intervals for various motorcycle components.

Safety During Service Procedures

Highlights crucial safety precautions to follow when performing maintenance on the motorcycle.

Engine Oil and Filter Change

Step-by-step guide for changing the engine oil and filter, including capacity and torque specs.

Drive Belt Maintenance

Covers drive belt condition analysis, tension adjustment, and cleaning procedures.

Suspension System Maintenance

Guides for adjusting rear suspension air pressure and inspecting front/rear suspension and steering.

Brake System Maintenance

Details maintenance for brake pedals, levers, discs, fluid levels, and hoses.

Tire and Wheel Maintenance

Covers tire inspection, pressure, and spark plug replacement procedures.

Electrical System Maintenance

Includes battery care, fuse replacement, and general electrical system precautions.

Cleaning and Storage

Washing the Motorcycle

Polishing the Motorcycle

Battery Care During Storage

Specifications

Engine Specifications

Drive System Specifications

Electrical System Specifications

Fuel Recommendation

Specifies the recommended type of unleaded gasoline and warnings against E85 or methanol blends.

Engine Oil Recommendation

Recommends VICTORY brand Semi-Synthetic 20W-40 Motor Oil or equivalent for wet clutch transmissions.

Fuses and Circuit Breakers