Victrola VA-60 - Assembly Instructions; Parts List; Hardware List; Step-by-Step Assembly

•
Take Leg (A) and Leg (B) and place them together, aligning the pre cut slots.
•
Take Leg (C) and Leg (D) and place them together, aligning the pre cut slots.
•
Making sure the flat part of the legs are on the boom, setup
the legs so the 4 holes are are all facing the same direcon.
•
Make sure that Leg (A) matches with Leg (B) and that Leg (C) matches with Leg (D)
STEP 1:
PARTS LIST
ASSEMBLING THE STAND
B
A
H
BA DC
1
LEGSA
B
C
LEGS
LEGS
LEGSD
E
Record
Rack
(1PC)
(1PC)
(1PC)
(1PC)
(2PCS)
F Bolts: 4 (PCS)
G Allen Key: 1 (PC)
H Dowels: 4 (PCS)
HARDWARE LIST