More technical information in the related troubleshooting chapter: Remote Console on VRM - Troubleshooting [71].
7.3. The Remote Console menu
The Remote Console menu (Settings → Remote Console) contains options for controlling access to the Remote Console via
LAN/WiFi and VRM and shows the online status of the Remote Console on VRM.
The options in detail:
1. Disable password check:
If this option is disabled, there is no password check when accessing the Remote Console.
2. Enable password check:
To enable password check, a password must first be assigned. Use this password when accessing the Remote Console.
Keep it in a safe place.
3. Enable on VRM:
If enabled, the Remote Console can be used via the VRM portal from anywhere in the world. The password check
(recommended) also applies if it is activated.
4. Remote Console on VRM - status:
Displays the online status of the Remote Console on VRM.
5. Enable on LAN:
If enabled, the Remote Console can be used via local LAN/WiFi. Mind the security warning.
Note that you need to manually reboot (Settings → General → Reboot) the GX device after changing any of these settings.
Color Control GX Manual
Page 36 Accessing the GX device
To Next Page
Loading...
